Showcase production, also known as counter production, is the process of turning a showcase design into a product.
1. Through the construction drawings and renderings of the showcase, the raw materials will be made into store showcases such as shopping malls and specialty stores. The production of a complete theoretical system is a theoretical theory, while the showcase production is a practical practice based on practice and derived from a theoretical system.
2, display production also includes the design and production of multi-dimensional products, such as display construction drawings, display floor plans; and showcase production mainly refers to three-dimensional three-dimensional product production such as store counter showcase production, mall showcase production, exhibition hall showcase production.
3. The exhibition production area is very extensive, and the introduction of the showcase is infiltrated into various subject areas from architecture, calligraphy, IT, etc. The showcase production refers only to the storefront and store production in the trading market. More similar articles: The cleaning method of the custom-made jewellery display cabinet of the road showcase The small jewellery showcase for the maintenance of the furniture takes the wooden cabinet as an example:
(1) Carpentry section: Determine the cabinet structure (effect diagram, plan, construction drawing): A: Structure: Determine the size of the cabinet body structure B: Material: 5 PCT, 9 PCT, 12 PCT, 15 PCT 3A high density Fiberboard
(2) Determine the structure and material, and enter the opening stage: the opener uses the manual push table precision saw to separate the different types of plates, and then enters the order of the woodworking nails to make the showcase, requiring the shape lines to be smooth and beautiful, nails Tightly packed, the glue is full.
(3) Paint section: A. Material: 3C certified national standard paint: (PE white primer, yellowing resistant wear-resistant topcoat)
(4) Batch ash grinding: firstly use the putty to fill the nail hole of the woodworking section, the interface gap and other depressions of the cabinet body. If the depression is too large, it should be returned to the woodworking section for technical treatment; after the atomic ash is dried, the pig blood ash is used. There shall be no omissions in the full cabinet. Then use 240# sandpaper to smooth the filled atomic ash and pig blood ash, and then seal the transparent primer. After the paint is dry, polish it with 240# sandpaper to make the cabinet surface smooth and flat.
(5) Primer: The whole cabinet is manually sprayed with PE white primer to isolate the cabinet from the outside world. It has moisture-proof and avoids the phenomenon of “painting the cabinetâ€, which can ensure the gloss and fullness of the finish.
(6) Oil mill: After the paint is dry, enter the sanding, use 240# sandpaper to level the cabinet, then use 400#/600# sandpaper to clear the good sand marks on the surface. 4) Topcoat: the exposed surface of the cabinet is painted by hand. The paint and topcoat masters have a good level of process operation. The paint room is guaranteed to be dust-free and isolated from the outside. The cabinet has no sag, no particles, uniform paint gloss and good hand feeling.
4, packaging: check the quality of the cabinet paint, hardware accessories, lighting wire installation A. Packaging materials: pearl cotton, bubble film package bottom layer, external corner protection, paper packaging, special cabinets are used wooden frame, wooden box packaging.
Acetate Eyewear Frame,Acetate Optical Frames,Acetate Optical Glass Frames,Bevel Acetate Optical Frame
Sense Optical , https://www.senseyewear.com