[China Glass Net] The service life of double-layer glass reactor is not only related to inverter, glass and motor, but also closely related to daily maintenance. To extend the service life of double-layer glass reactor, maintain your service. Interests, please read this section carefully, double-layer glass reactor sandwich can provide high temperature reaction (higher temperature can reach 300 ° C), can also do low temperature reaction (lower temperature can reach -80 ° C); and these daily work The damage to the double-glazed reactor is very large, so daily maintenance is very important.
The following are the routine maintenance methods for double-layer glass reactors:
1. Check whether the interfaces of the instrument are consistent. Pay attention to it.
2. The interfaces should not be tightened too tightly. It should be loosely activated at regular intervals to avoid long-term tight locking and cause the connector to bite.
3. Wipe each interface with a soft cloth (can be replaced with a napkin) and apply a small amount of vacuum grease. (The vacuum grease must be covered after use to prevent the entry of sand.)
4. Regularly clean the sealing ring by removing the sealing ring and checking if there is dirt on the shaft. Wipe it with a soft cloth, then apply a little vacuum grease and reinstall it to keep the shaft and seal ring smooth.
5, the PTFE switch everywhere can not be tightened too much, easy to damage the glass.
6. Loosen the PTFE switches after the machine stops. The long-term stationary state will make the PTFE piston deform.
7. Turn on the power switch first, then let the machine run from slow to fast. When the machine is stopped, stop the machine and turn off the switch.
8. Every time you use it, you must use a soft cloth to clean all kinds of oil traces left on the surface of the machine, stains, solvent remaining, and keep it clean.
9, the electrical part must not enter the water, it is strictly prohibited to get wet.
10, must purchase the original authentic accessories, free use of other accessories can cause fatal damage to the machine.
Remote Electric Roller Curtain
For a family, no one likes their every move in view of others. In this regard, different indoor areas have different standards of privacy concern. Area of public activity of member of this kind of family sitting room, to the requirement of privacy is inferior, major domestic sitting room is to pull open the curtain, be in adornment state below major circumstance. For bedrooms, toilets and other areas, people not only asked not to see, but also asked not to see the shadow. This caused the problem that the curtain of different area chooses different. Sitting room we may choose slant transparent cloth, and the bedroom chooses thicker qualitative cloth.
According to the user's different indoor lighting situation, as well as the curtain controller installation position, the user needs to automatically close or open the curtain brightness requirements are different, the machine specially for the user to set up the environment brightness automatic function. By the user according to the need to set their own environment brightness level to adjust, so that the intelligent light control curtain closed or opened more intelligent, humanized.
Remote Control Curtain, Electric Roller Blinds, Electric Curtain Blackout For Room
SHAOXING JEVA IMP.&EXP. CO., LTD. , https://www.xhcurtain.com